The Thrust harness is our newest design. We've changed up our standard bulldog harness by adding a solid stainless steel handle to one side. The harness is reversible - the handle can be on the back or the front so you can grab on and pull no matter what position you're in. Worn with the handle and buckles on the back, this harness is great for pulling your bottom tight as you thrust deep into them. Or wear it as a top with the handle and buckles on the front to allow your bottom to hold tight as you pound them. Also great for flagging at the bar. No need to worry about lube on your hands with this harnesses easy to clean stainless steel handle, so grab on and play dirty.
Harness is constructed of sturdy 9-10 ounce 1.5" wide black latigo leather. All hardware is stainless steel or chrome plated brass. All materials are domestically sourced and gear is handmade in Central Maine.
Chest Size Bulldog Harness Size
32-36 XS - Not available due to fixed handle size - Sorry.
To measure your chest, wrap a tailor’s flexible tape measure around your chest and under your armpits, directly across your nipples (or the largest part of your chest if you have significant chest tissue). If you do not have a suitable tape measure, you can use a non-stretchy string – mark it with a sharpie at the right length then lay it against a regular tape measure.
If you are close to two sizes, it is usually best to order the smaller size bulldog. Also, be aware that the bulldog typically sits on your chest several inches above your nipples. If you have significant chest tissue but less tissue higher up, you may be better off opting for one size smaller, or measuring higher than nipple height on your body.
Be the first to review this product.